Schneider Electric Preventa Cat. 1 Safety Relay Xpsate----P 24V Dc in UK Specification
Electrical Preventa Safety Relays by Schneider in UK
For emergency stop and switch monitoring. 24v dc. Safety modules xpsate are used for monitoring emergency stop circuits conforming to standards en/iso 13850 and en/iec 60204-1 and also meet the safety requirements for the electrical monitoring of switches in protection devices conforming to standard en/iso 14119. They provide protective for both the machine operator and the machine by immediately stopping the dangerous movement on receipt of a stop instruction from the operator, or on detection of a fault in the safety circuit itself. In addition to the stop-category0 instantaneous opening 2 n/o safety outputs, the modules incorporate 3 n/o stop-category1 time delay outputs which allow a controlled deceleration of the motor components until a complete stop is achieved. At the end of the preset delay, the supply is disconnected by opening the time delay output circuits. The time delay of the 3 output circuits is adjustable between 0 and 30 seconds using a 12-position selector switch.These xpsate modules incorporate 4 solid-state outputs for plc signalling and 4 leds to provide information on the monitoring circuit status. The start button monitoring function is configurable depending on the wiring. Quality electrical preventa safety relays in UK specification by Schneider at best discount price and fast shipping. UK distributor item ID: ZT1122693X.
Indicative Price: GBP 299.99
(for Actual Current Price, possibly lower, please click below)
For emergency stop and switch monitoring. Safety modules xpsac are used for monitoring emergency stop circuits conforming to standards en/iso 13850 and en/iec 60204-1 and also meet the requirements for the electrical monitoring of switches in protection devices conforming to standard en 1088/iso 14119.
For emergency stop and switch monitoring. Safety modules xpsac are used for monitoring emergency stop circuits conforming to standards en/iso 13850 and en/iec 60204-1 and also meet the requirements for the electrical monitoring of switches in protection devices conforming to standard en 1088/iso 14119.
For electrical monitoring of two-hand control stations. 24v ac/dc. Safety modules xpsbce meet the requirements of performance level pl e/category 4 conforming to standard en/iso 13849-1 and the european standard en 574/iso 13851 for two-hand control systems. The control stations must be designed and installed such that they cannot be activated involuntarily or easily rendered inoperative.
For electrical monitoring of two-hand control stations. 24v ac/dc. Safety modules xpsba meet the requirements of performance level pl c/category 1 conforming to standard en/iso 13849-1 and the european standard en 574/iso 13851 for two-hand control systems. The control stations must be designed and installed such that they cannot be activated involuntarily or easily rendered inoperative.
For emergency stop and switch monitoring. 24v dc. Safety modules xpsav are used for monitoring emergency stop circuits conforming to standards en/iso 13850 and en/iec 60204-1 and also meet the safety requirements for the electrical monitoring of switches in protection devices conforming to standard en/iso 14119.
For emergency stop, switch or safety light curtain monitoring. Safety modules xpsar meet the requirements of performance level pl e/category 4 conforming to standard en/iso 13849-1.
For electrical monitoring of two-hand control stations. 24v dc. Safety modules xpsbf meet the requirements of performance level pl e/category 4 conforming to standard en/iso 13849-1 and the european standard en 574/iso 13851 for two-hand control systems. The control stations must be designed and installed such that they cannot be activated involuntarily or easily rendered inoperative.
For emergency stop and switch monitoring. Safety modules xpsac are used for monitoring emergency stop circuits conforming to standards en/iso 13850 and en/iec 60204-1 and also meet the requirements for the electrical monitoring of switches in protection devices conforming to standard en 1088/iso 14119.
For emergency stop and switch monitoring. 24v ac/dc. Safety modules xpsaxe are used for monitoring emergency stop circuits conforming to standards en/iso 13850 and en/iec 60204-1. They meet the safety requirements for the electrical monitoring of switches in protection devices conforming to standard en/iso 14119.
For emergency stop, switch, sensing mat/edges or safety light curtain monitoring. Safety modules xpsak meet the requirements of performance level pl e/category 4 conforming to standard en/iso 13849-1.
For zero speed detection. 24v dc. The xpsvne most common applications include providing the unlock signal for electrically interlocked sliding or removable machine guards, controlling rotation direction signals for reversing motors and engaging locking brakes after a motor has come to a standstill.
For emergency stop, switch, sensing mat/edges or safety light curtain monitoring. Safety modules xpsak meet the requirements of performance level pl e/category 4 conforming to standard en/iso 13849-1.
For emergency stop and switch monitoring. Safety modules xpsac are used for monitoring emergency stop circuits conforming to standards en/iso 13850 and en/iec 60204-1 and also meet the requirements for the electrical monitoring of switches in protection devices conforming to standard en 1088/iso 14119.
For emergency stop, switch or safety light curtain monitoring. Safety modules xpsar meet the requirements of performance level pl e/category 4 conforming to standard en/iso 13849-1.
For emergency stop, switch and safety light curtain monitoring. 24v ac/dc. Safety modules xpsafl meet the requirements of performance level pl e/category 4 conforming to standard en/iso 13849-1.
