Schneider Electric Preventa Cat. 3 Safety Relay Xpsac----P 24V Ac/Dc in UK Specification
Electrical Preventa Safety Relays by Schneider in UK
For emergency stop and switch monitoring. Safety modules xpsac are used for monitoring emergency stop circuits conforming to standards en/iso 13850 and en/iec 60204-1 and also meet the requirements for the electrical monitoring of switches in protection devices conforming to standard en 1088/iso 14119. They provide protection for both the machine operator and the machine by immediately stopping the dangerous movement on receipt of a stop instruction from the operator, or on detection of an anomaly in the safety circuit itself.These xpsac modules incorporate 3 n/o safety outputs and a solid-state output for signalling to the plc and have 2 leds to provide information on the monitoring circuit status. Quality electrical preventa safety relays in UK specification by Schneider at best discount price and fast shipping. UK distributor item ID: ZT1122672X.
Indicative Price: GBP 142
(for Actual Current Price, possibly lower, please click below)
For emergency stop and switch monitoring. Safety modules xpsac are used for monitoring emergency stop circuits conforming to standards en/iso 13850 and en/iec 60204-1 and also meet the requirements for the electrical monitoring of switches in protection devices conforming to standard en 1088/iso 14119.
For emergency stop and switch monitoring. 24v ac/dc. Safety modules xpsaf meet the requirements of performance level pl e/category 4 conforming to standard en/iso 13849-1.
For emergency stop and switch monitoring. Safety modules xpsac are used for monitoring emergency stop circuits conforming to standards en/iso 13850 and en/iec 60204-1 and also meet the requirements for the electrical monitoring of switches in protection devices conforming to standard en 1088/iso 14119.
For electrical monitoring of two-hand control stations. 24v ac/dc. Safety modules xpsba meet the requirements of performance level pl c/category 1 conforming to standard en/iso 13849-1 and the european standard en 574/iso 13851 for two-hand control systems. The control stations must be designed and installed such that they cannot be activated involuntarily or easily rendered inoperative.
For emergency stop and switch monitoring. Safety modules xpsac are used for monitoring emergency stop circuits conforming to standards en/iso 13850 and en/iec 60204-1 and also meet the requirements for the electrical monitoring of switches in protection devices conforming to standard en 1088/iso 14119.
For emergency stop, switch, sensing mat/edges or safety light curtain monitoring. Safety modules xpsak meet the requirements of performance level pl e/category 4 conforming to standard en/iso 13849-1.
For emergency stop and switch monitoring. 24v ac/dc. Safety modules xpsaf meet the requirements of performance level pl e/category 4 conforming to standard en/iso 13849-1.
For emergency stop, switch and safety light curtain monitoring. 24v ac/dc. Safety modules xpsafl meet the requirements of performance level pl e/category 4 conforming to standard en/iso 13849-1.
For coded magnetic switch monitoring. 24v dc. Safety modules xpsdmb meet the requirements of performance level pl e/category 4 conforming to standard en/iso 13849-1. These safety modules are specifically designed for monitoring two independent sensors. To monitor a higher number of magnetic switches using the xpsdmb, the magnetic switches can be connected in parallel series.
For emergency stop and switch monitoring. Safety modules xpsac are used for monitoring emergency stop circuits conforming to standards en/iso 13850 and en/iec 60204-1 and also meet the requirements for the electrical monitoring of switches in protection devices conforming to standard en 1088/iso 14119.
For coded magnetic switch monitoring. 24v dc. Safety modules xpsdme meet the requirements of performance level pl e/category 4 conforming to standard en/iso 13849-1. These safety modules are specifically designed for monitoring six independent sensors. To monitor a higher number of magnetic switches using the xpsdmb, the magnetic switches can be connected in parallel series.
For electrical monitoring of two-hand control stations. 24v ac/dc. Safety modules xpsbce meet the requirements of performance level pl e/category 4 conforming to standard en/iso 13849-1 and the european standard en 574/iso 13851 for two-hand control systems. The control stations must be designed and installed such that they cannot be activated involuntarily or easily rendered inoperative.
For emergency stop, switch, sensing mat/edges or safety light curtain monitoring. Safety modules xpsak meet the requirements of performance level pl e/category 4 conforming to standard en/iso 13849-1.
For emergency stop and switch monitoring. 24v dc. Safety modules xpsav are used for monitoring emergency stop circuits conforming to standards en/iso 13850 and en/iec 60204-1 and also meet the safety requirements for the electrical monitoring of switches in protection devices conforming to standard en/iso 14119.
For emergency stop, switch, sensing mat/edges or safety light curtain monitoring. Safety modules xpsak meet the requirements of performance level pl e/category 4 conforming to standard en/iso 13849-1.
